• info@vaeplus.com
Page Banner

INTERCHANGEABLE POWER ADAPTER

12W DC Tips (Optional)


  • Product Specifications
  • Input

    100-240VAC

  • Output

    see below model list

  • Plug Type

    US, EU, UK, AUS, KR, JP, CN plug optional

  • Certificates:

    UL,CE,FCC,TUV,UKCA,RCM, SAA, C-TICK,ROHS,REACH

  • Color

    black or white optional

  • DC Connector
    .

    5.5*2.1mm, 5.5*2.5mm, 4.0*1.7mm,
    3.5*1.35mm, USB A etc...


  • Product Specifications
  • Protection

    With Over-current, over-voltage, short-circuit, over-temperature protection to protect circuit.

  • Standby

    The input power shall be less than 0.075W at 110 or 230Vac input.

  • Ripple and Noise
    .

    Ripple voltage is 120mV p-p (Full load 1A) measured methods: Performed by 20MHz bandwidth in oscilloscope Applied 0.1uF ceramic capacitor and 47uF electrolytic capacitor across output connector terminals Measured at the end of DC cable. The environment temperature is 25℃ or aging test after 15 minutes.

  • Efficiency

    Measured at 115Vac or 230Vac input voltage, Average efficiency can reach energy star VI (83.26%) standard.

  • Hi-Pot Test
    .

    Primary to Secondary: 3000Vac /10mAMax / 60S (when safety testing);
    Primary to Secondary: 3300Vac /5mAMax / 3S (when production).

  • Insulation Resistance

    100MΩ min. between primary to secondary add 500Vdc test voltage.

  • Leakage Current

    0.25mA maximum, at nominal AC input voltage and frequency.

  • Burn-In Test

    2 hours at 45°C maximum, Normal input voltage, rated load.

  • Input plug type
    .

    Wall-mounted type. US-pin. 2 Conductors, < Live. Neutral > Wall-mounted type. BS-pin. 2 Conductors, < Live. Neutral >
    Wall-mounted type. EU-pin. 2 Conductors, < Live. Neutral > Wall-mounted type. AU-pin. 2 Conductors, < Live. Neutral >

  • Drop Test
    .

    Drop the adaptor from a height of 100cm onto a hardwood floor, hitting the adaptor for 6 times, no mechanical damages or other failures, no electrical deterioration and other failures comparing to before test condition.

  • Operating temperature range

    The product should operate at 0~45℃,
    test of operating for 4 hours at 0℃±2℃ and 45℃±2℃.

leave your review